DTH hammer full automatic hydraulic pressure disassembly bench | company | News | WORLDRILL
High Durability, Better Productivity, More Efficient
Opening times Mon - Sat: 8.30 - 17.30
Call Us Now 0086-13335075578 0086-13906486398
Inquiries

News Category

You are here: Home > News>company>DTH hammer full automatic hydraulic pressure disassembly bench

Categories

DTH hammer full automatic hydraulic pressure disassembly bench

Time:2019-07-03 Click:226

Today, my friends, I want to introduce the product is very special, though not our main product, but our main product is absolutely inseparable from it, have it can bring twice the result with half the effort, so our customers are always love and support it, it is -- -- -- -- --  DTH hammer full automatic hydraulic pressure  disassembly bench

After friends buy DTH hammer back, use it for a period of time, It needs to a bath and rest well, although we have a complete good after-sales service, but let it come back is a waste of time and money by ship ,more serious is that affect the work of bosses, that we can't allow, for friends, so we recommend this product for friends.Whether you want to clean it up or teach it a lesson, you can do it easily at home.

 

Here's how to use it:

1. Please lift the impactor to the disassembly table

2. Push the handle and adjust the unloading rod oil cylinder to a height you feel comfortable with

3.  Adjust the left chain to jam the DTH hammer connector square and fasten the movable pin

4. Adjust the right chain to jam the joint of the external cylinder of the DTH hammer and buckle the movable pin

5. Push forward the left and right chain operating handle, and slowly remove the DTH hammer connector

6. After disassembly, return oil to the unloading rod oil cylinder. After oil return, remove the movable pin, loosen the left and right chains, and turn the DTH hammer around

7. Then adjust the unloading rod oil cylinder to a comfortable height, adjust the right and left chain to jam the socket and the socket end of the external cylinder of the DTH hammer, and buckle the movable pin respectively.Push forward the operating handle of the left and right chains to remove the drill sleeve of the DTH hammer

8. After the DTH hammer is removed, twist the drill bit and bit sleeve out of the outer bar together, and take out the clip ring and the baffle wire

9. Take out the check valve, spring, pressure pad (some products have), distribution seat ,inner cylinder components and piston at the joint.

10.Clean all accessories with diesel oil, dry and lubricate

This is how the DTH hammer is removed and maintained. It's as simple as that.

My friends have a bit of a dirty shock, it will give them a bath

See this article come in will have discount!